A1125LUA-T
Hall Effect Sensor, SIP, 3 Pins, 3 V, 24 V, -40 °C
Aveți nevoie de mai mult?
| Cantitate | Preț (fără TVA) |
|---|---|
| 1+ | 5,230 lei |
| 10+ | 4,630 lei |
| 50+ | 4,500 lei |
| 100+ | 4,070 lei |
| 250+ | 3,990 lei |
| 500+ | 3,910 lei |
| 1000+ | 3,610 lei |
| 2500+ | 3,600 lei |
Detalii tehnice
Prezentare generală a produsului
The A1125LUA-T is a chopper-stabilized unipolar Precision Hall Effect Switch has extremely temperature-stable and stress-resistant feature. Device includes on a single silicon chip a voltage regulator, hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger and a short- circuit protected open-drain output to sink up to 25mA. A south pole of sufficient strength turns the output ON. Removal of the magnetic field turns the output OFF. It is specially suited for operation over extended temperature ranges to 150°C. Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-moulding, temperature dependencies and thermal stress.
- Resistant to physical stress
- Superior temperature stability
- Output short-circuit protection
- Operation from unregulated supply
- Reverse-battery protection
- Solid-state reliability
- AEC-Q100 Automotive qualified
Aplicaţii
Sensing & Instrumentation, Automotive
Specificaţii tehnice
Unipolar
SIP
SIP
24V
150°C
-
25mA
3Pins
3V
-40°C
-
Documentaţie tehnică (1)
Legislaţie şi reglementări privind protecţia mediului
Tara in care ultimul proces semnificativ de fabricare a fost efectuatŢara de origine:Philippines
Tara in care ultimul proces semnificativ de fabricare a fost efectuat
RoHS
RoHS
Certificat de conformitate produs