LT1009S8#TRPBF

LT1009 is a precision trimmed 2.5V shunt regulator diode featuring a maximum initial tolerance of only ±5mV. The low dynamic impedance and wide operating current range enhances its versatility. The 0.2% reference tolerance is achieved by on-chip trimming which not only minimizes the initial voltage tolerance but also minimizes the temperature drift. Even though no adjustments are needed with this, a third terminal allows the reference voltage to be adjusted ±5% to calibrate out system errors. In many applications, this can be used as a pin-to-pin replacement of the LM136 and the external trim network eliminated. Typical applications are reference for 5V systems, 8-bit A/D and D/A reference, digital voltmeters, current loop measurement and control systems, power supply monitor.

• Maximum initial tolerance is 0.2%
• Guaranteed temperature stability
• Maximum 0.6ohm dynamic impedance
• Wide operating current range
• Directly interchangeable with LM136 for improved performance
• No adjustments needed for minimum temperature coefficient
• Reverse breakdown voltage is 2.5V at TA = 25°C, IR = 1mA
• Average temperature coefficient is 25ppm/°C at 0°C ≤ TA ≤ 70°C
• 8-lead plastic SO package
• Temperature rating range from 0°C to 70°C

Note

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party