MAX4616CSD+

The MAX4616CSD+ is a low voltage, high speed, quad, SPST CMOS analogue switch in 14 pin NSOIC package. This single-pole/single-throw (SPST) analogue switch is pin compatible with the industry standard 74HC4066/MAX4610 analogue switches. The on-resistance (10 ohm max) is matched between switches to 1ohm (max) and is flat (1ohm max) over the specified signal range. Each switch handles V+ to GND analogue signal levels. It has maximum off-leakage current of only 1nA at TA = +25°C and 6nA at TA = +85°C. This device is used in sample and hold circuits, battery operated equipment and low voltage data acquisition systems.

• Supply voltage range is 2V to 5.5V
• Operating temperature range from 0°C to 70°C
• Fast switching times are 12ns tON and 10ns tOFF at (TA = +25°C, VCOM_ = 3V, single +5V supply)
• Maximum on-resistance of 60 ohm at TA = +25°C (single +2.5V supply)
• Rail to rail signal handling
• TTL/CMOS logic compatible
• Two normally open (NO) switches and two normally closed (NC) switches
• Charge injection is 6.5pC
• Crosstalk of -96dB at RL = 50 ohm, f = 100KHz (single +5V supply)
• On-channel bandwidth of 70MHz at signal = 0dBm, TA = +25°C (single +5V supply)
• Audio/Video Signal Routing; Battery-Powered Applications; Communication Systems; Low-Voltage Data Acquisition; Sample-and-Hold Circuits

Aplicaţii

Signal Processing, Portable Devices, Communications & Networking

Note

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party