MCP6292-E/P
Operational Amplifier, Dual, 2 Channels, 10 MHz, 7 V/µs, 2.4V to 5.5V, DIP, 8 Pins
420 Vă puteți rezerva stocul acum
| Cantitate | Preț (fără TVA) |
|---|---|
| 1+ | 5,590 lei |
| 25+ | 4,620 lei |
| 100+ | 4,420 lei |
| 250+ | 4,230 lei |
Detalii tehnice
Prezentare generală a produsului
The MCP6292-E/P is an Operational Amplifier provides wide bandwidth for the current. This family has a 10MHz Gain Bandwidth Product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.4V, while drawing 1mA (typical) quiescent current. In addition, the MCP6292 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS - 300mV. This family of operational amplifiers is designed with Microchip’s advanced CMOS process. This device is manufactured by cascading the two op amps, with the output of op amp A being connected to the non-inverting input of op amp B. The CS input puts the device in a low-power mode. The MCP6292 family operates over the extended temperature range of -40 to +125°C. It also has a power supply range of 2.4 to 6.0V.
- Wide bandwidth
- Supports rail-to-rail input and output swing
Aplicaţii
Automotive, Power Management
Specificaţii tehnice
2Channels
7V/µs
DIP
General Purpose
3mV
Through Hole
125°C
AEC-Q100
No SVHC (25-Jun-2025)
AEC-Q100
2 Amplifier
10MHz
2.4V to 5.5V
8Pins
Rail - Rail Input / Output (RRIO)
1pA
-40°C
-
-
DIP
10MHz
7V/µs
Documentaţie tehnică (3)
Legislaţie şi reglementări privind protecţia mediului
Tara in care ultimul proces semnificativ de fabricare a fost efectuatŢara de origine:United States
Tara in care ultimul proces semnificativ de fabricare a fost efectuat
RoHS
RoHS
Certificat de conformitate produs